Do you ever hear about Finger Jointed Panels? Well, these wood panels are made from the single-layer panels. Only the best natural woods that can be used for making these wood panels. Therefore, it will have better quality than other wood panels. Since the natural woods are used for finishing the panels, these wood panels are suitable for creating furniture and used as the home decoration. These wood panels will keep their shapes even after being used for a long time.
There are several materials that can be used for making finger jointed wood panels. Those materials are oak, steamed or un-steamed beech, BER, walnut, ash, teak, European maple, iroko, and hevea. Each material has its own characteristics regarding its shape and size when it is made to the finger jointed wood panels. For example, the oak, steamed or un-steamed beech, BER, walnut, ash, teak, European maple, iroko will have different lamellas sizes, thickness, length, and even width of panels compare to the hevea. The hevea finger jointed wood panels normally will have a width of lamellas around 40 mm. The thicknesses of these panels will about 18, 22, 33, 44, and 56 mm. The width of these panels is 1.100 mm with a length of about 4.500 mm. Meanwhile, the wooden poles are made with a length of about 4000 mm and the size of sections about 70 x 70 mm or 90 x 90 mm. The rest materials have similar size relatively. The width of lamellas for those panels are about 20 mm and 40 mm. The thicknesses are about 19, 26, 31, 40, and 50 mm. Meanwhile, the width of the panels is about 950 mm and 650 mm for worktops. On the other hand, the lengths of those panels are about 4000 mm and 2000 mm for worktops.
As mentioned previously that the finger jointed wood panels can be used for the home decorations. For example, the use of finger jointed wood panels as the interior design. You can use this panel as a part of the interior design of the dining room. These wood panels can be used as the top of the dining table. The addition of the finger jointed wood panels can improve the warm feeling of the room. In addition, it also increases the aesthetical look of the room. Or else, the finger jointed wood panels also can be used as a part of the bathroom decoration. Normally, the walnut wood panels are usually used since it provides high durability and clean design look. On the other hand, these wood panels also can be used as the worktop of the kitchen cabinets. Once again, it can create such a warm feeling in the kitchen room. The clean look and traditional style can make a good combination design for the kitchen room. These wood panels also can be an option for creating hanging shelves in the kitchen. It can be chosen for saving a lot of space in the kitchen and improving the beauty of the kitchen room.